How do you to wrap a halligan tool handle with paracord?

Wrapping a Halligan tool handle with paracord is not only practical but can also increase grip, provide a comfortable surface for long-term use, and offer an emergency source of cordage. The Halligan tool, a multi-use piece of equipment used by firefighters and law enforcement for prying, breaching, and striking, benefits greatly from such a modification, especially in high-stress situations where secure handling is critical. Here’s an in-depth guide on how to wrap your Halligan tool handle with paracord, the benefits of doing so, and some tips for ensuring the wrap is effective.

Why Wrap a Halligan Tool with Paracord?

Wrapping your Halligan tool with paracord serves several purposes:

1. Improved Grip: A metal tool handle can become slippery, especially when wet or covered in debris. Paracord provides a textured grip that ensures secure handling in any situation.
2. Comfort: Over time, handling a metal tool without any cushioning can lead to fatigue or even blisters. Paracord provides a soft yet firm grip, making it more comfortable to use.
3. Durability: Paracord is tough and resilient. A properly wrapped handle will last through extensive use, ensuring that the tool remains functional over long periods.
4. Utility: Paracord is highly versatile. In an emergency, the paracord wrap can be unwound and used for various purposes, such as tying gear, building a shelter, or creating a tourniquet.
5. Customization: Beyond its utility, paracord comes in various colors and patterns, allowing for customization to match department colors, unit identification, or personal preference.

Materials Needed

Before you start wrapping your Halligan tool handle, gather the following materials:

• Paracord (550 cord): You’ll need 10-15 feet of paracord, depending on the size of your tool handle and the wrapping technique you choose.
• Scissors or a Knife: To cut the paracord to the required length.
• Lighter: To seal the ends of the paracord and prevent fraying.
• Electrical tape or clamps (optional): To help secure the starting point of the wrap, if needed.

Step-by-Step Guide to Wrapping a Halligan Tool Handle

1. Prepare the Paracord

Before you begin, decide on the length of paracord needed. The longer the handle, the more paracord you’ll require. Measure your paracord by holding it against the handle and estimating how many wraps you’ll need. Cut the cord, leaving a bit of extra length in case of mistakes.

2. Start the Wrap at the Base

Begin at the bottom of the handle. Secure one end of the paracord tightly using a knot. A simple overhand knot will suffice, but make sure it is tight enough that it won’t come loose during wrapping. Some people prefer to use electrical tape to hold the starting point in place, but this is optional.

3. Begin Wrapping Tightly

Start wrapping the paracord around the handle in a spiral motion. The key here is to keep each wrap tight and close together. You don’t want gaps between the cord wraps, as this can reduce the effectiveness of the grip and create weak spots. Make sure to pull the cord firmly with each wrap to maintain tension.

There are a few techniques you can use for wrapping:

• Standard Wrap: This is the simplest method, where you simply spiral the cord around the handle without any special knots or patterns.
• Cobra Weave: For a more textured and secure grip, you can use a cobra weave. This involves weaving the paracord in a way that creates a raised, braided surface that enhances the grip even further.
• Double Wrap: For additional durability and a thicker grip, you can wrap the handle twice with the paracord. The first layer covers the handle, and the second layer adds extra cushioning.

4. End at the Top

Once you’ve wrapped the entire handle, finish at the top. Secure the end of the paracord with a knot, making sure it is tight and won’t come undone during use. If necessary, use electrical tape or a clamp to hold the end in place while you finish securing it.

5. Melt the Ends

To prevent the paracord from fraying, use a lighter to melt the cut ends of the cord. Gently pass the flame over the ends until they melt and form a hard, sealed tip. Be careful not to overheat the cord or burn it, as this can damage the paracord and reduce its effectiveness.

6. Test the Wrap

Before putting your newly wrapped Halligan tool to use, give it a test. Make sure the wrap is tight, secure, and comfortable to hold. Try gripping the tool with gloves on to ensure that the paracord provides the intended level of grip and cushioning.

Tips for a Successful Paracord Wrap

• Keep the Tension Consistent: For a smooth and even wrap, it’s essential to maintain consistent tension on the paracord. Loose wraps will slide around and compromise the grip.
• Avoid Over-Wrapping: While a thick grip may feel comfortable initially, over-wrapping the handle can make it difficult to use the tool effectively in some situations. Strike a balance between comfort and functionality.
• Use Quality Paracord: Not all paracord is created equal. Look for genuine 550 paracord, which is rated for 550 lbs of tensile strength. This type of paracord is durable and reliable, ensuring your wrap lasts.
• Practice Makes Perfect: If this is your first time wrapping a tool handle, don’t worry if it doesn’t turn out perfect the first time. Wrapping handles takes practice, and you can always undo and start over if needed.

Conclusion

Wrapping a Halligan tool handle with paracord is a simple yet effective way to enhance its usability in the field. With improved grip, increased comfort, and the added utility of paracord, your Halligan tool will be more efficient and reliable when you need it most. Whether you’re a firefighter, law enforcement officer, or breacher, this practical modification can make a big difference during high-stress operations.

How to use Halligan Tool?

Halligan – The Jersey Bar